A
combination antenna receives
normal broadcast channels
(VHF 2-13 and UHF 14-69).
Your connection is easy since
there is only one 75Ω (ohm)
antenna plug on the back of your
TV - and that’s where the antenna
goes.
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
Push the round end of the adapter
(or antenna) onto the 75 Ω plug
on the rear of the TV. If the round
end of the antenna wire is threaded,
screw it down tight.
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)
