31
Appendix
TipsPlaybackConnections
Contents
Front panel Rear panel IndexRemote
Settings
When a pre-amplifier is connected to this unit and the unit is used as a
power amplifier, follow the instructions below to turn power amp direct
mode on.
POWER AMP DIRECT
Turning power amp direct mode on
1
Press and hold POWER AMP DIRECT for more than 3
seconds to turn the power amp direct mode on.
The power amp direct indicator lights and the power amp direct
mode turns on. The input source switching function of the unit is
disabled, and the device connected to the power amp direct input
terminal is played back.
Turning power amp direct mode o
1
Press and hold POWER AMP DIRECT for more than 3
seconds to turn the power amp direct mode o.
The power amp direct indicator turns o and the power amp direct
mode turns o.
NOTE
•When the power amp direct mode is on, adjustment of the volume, balance and
tone on the main unit has no eect. Adjust the volume on the pre-amplifier.
•When the power amp direct mode is on, the main unit outputs at maximum
volume. Check the output level on the input device before playing it and adjust the
volume accordingly.
Setting the power amp direct mode
