DRY IRONING
•The iron can be used on the dry setting with
or without water in the water tank, it is best
to avoid having the water tank full while dry
ironing.
•Turn the variable steam control to the mini-
mum position.
•Select the setting on the temperature control
dial best suited for the fabric to be ironed.
CAUTION: If the iron has been used for a long
period of time, it is hot and there is no water in
it, do not refill it with water until the iron cools
down.
BURST OF STEAM
•The burst of steam feature provides additional
steam for removing stubborn wrinkles.
•Turnthetemperaturecontrolto”••”or“•••”
position.
•Turn the variable steam control to the maxi-
mum position
•Press the powerful steam button to release the
burst of steam.
NOTE: To prevent water leakage from the sole-
plate, do not keep the powerful steam button in
for more than 5 seconds.
After Ironing
•Set the temperature control dial to the mini-
mum position.
•Remove the plug from the wall socket.
CARE AND CLEANING
•Before cleaning the iron ensure it is unplugged
from the wall socket and that it has completely
cooled down.
•Do not use any abrasive cleaners.
SELF-CLEANING
•Fill half of the water reservoir.
•Set the temperature control to its maximum
position.
•Insert the plug into the wall socket.
•Allow the iron to heat up until the indicator
light goes out.
•Unplug the steam iron.
•Holding the iron horizontally over the sink,
change the steam control to the maximum
position.
•Boiling water and steam will be ejected from
the holes in soleplate with impurities washed
out.
•Move the iron over an old piece of cloth. This
ensures that the soleplate is dry before stor-
ing.
STORAGE
•Unplug the appliance from the wall socket,
empty the water tank and the iron to cool
down completely.
•To protect the soleplate, place the steam iron
in an upright position.
23140_IM.indd 3 2013/07/15 08:21:45 AM
