13
CD OPERATION (CONTINUED)
While in the Stop mode, press the
PROG/EQ/ENTER button. The track
number will blink and “P-01” will appear
in the display.
1
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
Select a track to be programmed using the
Skip
o 1 or n 2 button. If using a MP3
disc, see note below.
2
Press the PROG/EQ/ENTER button to
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 24 tracks.
3
Press the PLAY/PAUSE (®p)/POWER
ON/▲ button to begin program
playback.
4
NOTES:
• To clear the memory, while in the Stop mode, press and hold the MODE/
CLEAR button until “P” disappears from the display.
• MP3: If an MP3 CD is inserted, you will first select the directory number in
step 2 followed by the PROG/EQ/ENTER button, and then the file/track
number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
