28
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic Operations (continued)
The menu screen will not be cleared even when
pressing the SET UP button when the setting item
is flashing.
6. Turn the JOG dial to select “0.25P” and turn the SHUTTLE
ring clockwise.
• Setting is confirmed and flashing stops.
<RECORD SETTING> ALARM
NO PPS GRADE A-PPS A-GRADE
0.25P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
NEXT PAGE SHUTTLE<<:BACK
9
7
4
5
6
1
2
3
8
7. Turn the JOG dial clockwise to reverse display “GRADE”
and turn the SHUTTLE ring clockwise.
• The background of the “GRADE” setting turns red and
flashes.
<RECORD SETTING> ALARM
NO PPS GRADE A-PPS A-GRADE
0.25P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
NEXT PAGE SHUTTLE<<:BACK
9
7
4
5
6
1
2
3
8
When the setting item is flashing, the menu
screen cannot be cleared even when pressing the
SET UP button.
8. Turn the JOG dial to select “HIGH” and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<RECORD SETTING> ALARM
NO PPS GRADE A-PPS A-GRADE
0.25P HIGH 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
NEXT PAGE SHUTTLE<<:BACK
9
7
4
5
6
1
2
3
8
9. When the setting is complete, turn the SHUTTLE ring
counterclockwise.
• The cursor moves to the camera number on the left.
• When continuing with other camera number settings, turn
the JOG dial to move the cursor to the desired camera number
and repeat steps 4 ~ 8 to perform settings.
<RECORD SETTING> ALARM
NO PPS GRADE A-PPS A-GRADE
>>
0.25P HIGH 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
1.875P STD 1.875P STD
NEXT PAGE SHUTTLE<<:BACK
9
7
4
5
6
1
2
3
8
10. Turn the SHUTTLE ring counterclockwise or press the SET
UP button to return to the normal screen.
11. Press the REC/STOP button.
• The REC/STOP button turns on and recording starts.
12. To stop recording, press the REC/STOP button for more
than 1 second.
• Recording stops and the REC/STOP button turns off.
REC/STOP
■ Basic playback
This unit allows recorded video to be played back using
various methods. The basic playback described here is the
most common method for playback.
1. Press the PLAY button (inside the front door) on the front of
the unit.
• Recorded contents of the HDD are played back.
• After turning the power on, the oldest recorded video is
played back first. Otherwise, playback resumes at the position
of the previous playback.
PLAY( )
REV. PLAY
( )
PAUSE/
SHUTTLE HOLD
STOP
When the “HDD REPEAT PLAY” setting in the
“HDD SETTINGS” is set to “OFF”, playback is
stopped when reaching the end of the physical HDD
or recorded section. When the “HDD REPEAT PLAY”
setting is set to “ON”, recorded video data is played
back repeatedly (
see “HDD REPEAT PLAY”,
page 53).
2-1. (To change HDD, archive/copy device, or Compact Flash
Card playback device
• • •
)
• Select the device you wish to playback by using the PLAY
DEVICE button on the front of the unit.
• PLAY DEVICE indicators
MAIN : Plays data from MAIN, SUB.
ARCHIVE : Plays data from the peripheral record-
ing device connected to ID4 when “ID4•ID5” is set
to “ARCHIVE•COPY”.
COPY : Plays data from the peripheral recording
device connected to ID5 when “ID4•ID5” is set to
“ARCHIVE•COPY”.
CFC : Plays data from the Compact Flash Card.
2-2. Press the PLAY button.
• Plays from the playback device that has been selected.
