A SERVICE OF

logo

151
r
3 Select direct measurement mode.
Release the WB button briefly and then
press the button until the L icon
starts to flash.
A flashing D will also
appear in the top control panel and
viewfinder.
At default settings, the
displays will flash for about six
seconds.
4 Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way down.
The camera
will measure a value for white balance and store it in preset
d-0.
No photograph will be recorded; white balance can be
measured accurately even when the camera is not in focus.
Rear control panel
Viewfinder
Top control panel
SHOOT
CUSTOM