Multiple
exposure
lever
5
Taking a picture of different subjects or two or more of the same
subject
on
the same frame means multiple exposure.
To
make a
multiple exposure, observe the following:
1)
Take
the first shot. (Press the shutter release button.)
2)
Pull
the multiple exposure lever
in
the direction of the arrow
shown
in
the photo, as you wind the film advance lever fully.
The frame counter will not advance; only the shutter
is
ready
to be released again. Although the finger pulling the multiple
exposure lever will automatically slip off the lever as the film
advance lever
is
wound, multiple exposure operation will
have been performed correctly.
3)
After winding the film advance lever fully, take the second
shot.
To
take three exposures or more
on
the same frame, repeat the
procedures described
in
2)
and
3)
.
No
te: In multiple exposure photography, the FM2
is
designed to reduce
film dislocation to the minimum. But it may occur due to film curling, film
slack
or
inappropriate film winding.
~
'--"
-
"tt
-~-~---~--
-----
31
