NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-43738
27) ZONE FOUR, FIVE, AND SIX 12V TRIGGER OUTPUTS — Three 3.5 mm mini-jacks are used to provide a 12V DC trigger
to automate the power turn-on and turn-off of zone-specifi c connected devices such as Niles Systems Integration Amplifi ers.
28) GLOBAL IR INPUT — A single 3.5 mm mini-jack is used to provide an input connection for IR commands from an external
control system such as the Niles iC2
™
Home Theater Automation System (FG01342).
29) HT (HOME THEATER) SYNC INPUT — A single 3.5 mm mini-jack is used to detect voltage from a connected home
theater system to let the ZR-6 MultiZone Receiver know when the home theater is on.
30) RACK MOUNT EARS — Two metal rack-mount ears are included and can be attached for installing the ZR-6 MultiZone
Receiver into a professional rack.
31) IEC POWER CABLE CONNECTOR — Two-pin connector for the removable power cord.
32) LOUDSPEAKER TERMINALS — A removable terminal is provided for each of the six zones. Accepts speaker wire up to
14 AWG.
33) ZONE FOUR, FIVE, AND SIX PREAMPLIFIER OUTPUTS — Three pairs of stereo RCA jacks are used to connect
external power amplifi ers. Can be switched between fi xed or variable output.
34) SOURCE AUDIO INPUTS — Four pairs of stereo RCA jacks are used to connect stereo audio to Sources 3-6.
35) SOURCE 2 AUDIO INPUT/iPod CASCADE AUDIO OUTPUT — A pair of stereo RCA jacks are used to provide an
analog input for a Source 2 external device when an iPod is not being used with the system. With an iPod, these jacks become
cascade audio outputs to route the iPod’s audio signal to a Slave ZR-6 MultiZone Receiver.
36) iPod CONNECTOR — A 30-pin connector is used to provide a connection for an iPod digital music player as Source 2.
ZR-6 MULTIZONE RECEIVER REAR PANEL (CONTINUED)
SYSTEM PARTS GUIDE
