(Revised 2010-7-2) page 121 of 145
Eventlog Related Commands
Get Eventlog count
To display the logged events count
N-TRON/Admin#[1]> eventlog get count
No. of events logged : 14
Get Eventlog level
To display the present log level
N-TRON/Admin#[1]> eventlog get loglevel
Present log Level: 1
There are 5 levels or categories that events are classified as. Level 1 will
log all 5 types into the event log. Level 5 will log on the highest level
“Critical” in the event log. The log levels in order from least severe to
most critical are: Informational, Warning, Minor, Severe, & Critical.
Get Eventlog size
To display the present log size
N-TRON/Admin#[1]> eventlog get logsize
Present Log Size: 100
Set Eventlog level
To set the log-level to a specified value for filter out the raised events.
eventlog set loglevel <level>
level
The log level. The value is ranging from 1-5
N-TRON/Admin#[1]> eventlog set loglevel 3
N-TRON/Admin#[2]> eventlog set loglevel 1
N-TRON/Admin#[3]> eventlog set loglevel 2
There are 5 levels or categories that events are classified as. Level 1 will
log all 5 types into the event log. Level 5 will log on the highest level
“Critical” in the event log. The log levels in order from least severe to
most critical are: Informational, Warning, Minor, Severe, & Critical.
Set Eventlog size
To set the maximum number of events to be stored in the list.
eventlog set logsize <size>
size
The log size. Maximum number of events that can be stored.
N-TRON/Admin#[1]> eventlog set logsize 100
N-TRON/Admin#[2]> eventlog set logsize 20
