A SERVICE OF

logo

6
Activate Installed Options in the Driver
7. Click Configure.
8. Optional Trays
: To engage optional trays, change the setting for
Available Tray to 2 or 3 depending on how many trays you have
installed.
9. Duplex Unit
: To engage the Duplex Unit, change the setting to
Installed.
10. Hard Disk Drive
: To engage the hard disk drive, change the
setting to Installed.
11. DIMMs
: To engage additional memory, set Memory
Configuration to the new total value of memory installed
(standard memory + any installed optional DIMM memory).
12. When done, click OK.
13. Click OK.
14. Close Chooser.
Mac9.1
_Select
Options
.jpg