0502S20006 5-1
TROUBLESHOOTING
DANGER
ALWAYS DISCONNECT THE GRILLE FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY TYPE OF MAINTENANCE TASK, INCLUDING
TROUBLESHOOTING.
CAUTION
COOKING SURFACES ARE HOT
USE CARE WHENEVER WORKING NEAR THEM.
ALLOW SUFFICIENT TIME FOR COOLING BEFORE BEGINNING WORK.
NOTE
ON DUAL UNITS REMEMBER THAT EACH SIDE HAS SEPARATE CONTROLS.
The Grille is not Heating (Indicator Light Is Not
On)
• The grille is not plugged in.
• The grille’s selector switch is in the “Off” position. Select one of the two heat
positions.
• There is no power at the outlet. (Check by plugging in another working appliance.
Check to see if a circuit breaker has tripped. If the circuit breaker has not tripped
and the circuit is still not working have a qualified electrician check the circuit.)
• The problem is with one or more of the following grille components: power cord,
indicator light, or selector switch. (Have a qualified electrician find and repair the
problem.)
The Grille is not Heating (Indicator Light Is
On)
• The thermostat (temperature selection knob), is set either in the “Off” position or is
set below 120º F.
• If the thermostat is properly set and the selector switch is set to top and bottom
platen heating and both platens are not getting hot have a qualified electrician check
the selector switch and the thermostat for proper operation.
Continued
