HD3000 User’s Guide
Professional Video Scaler and Color Management System
HD3000 User’s Guide 56
Connector Detailing
Input Connectors:
Video 1: CVBS.
Video 2: CVBS.
Video 3: CVBS.
SVideo 1: S Video.
SVideo 2: S Video.
SVideo 3: S Video.
HD1: YPbPr through RCA connectors. Supports 480i/576i, 480p/576p, 720p, 1080i.
HD2: YPbPr through RCA connectors. Supports 480i/576i, 480p/576p, 720p, 1080i.
HD3: YPbPr through BNC connectors with HV BNC connectors. Supports 480i/576i,
480p/576p, 720p, 1080i, and SCART RGB.
HD4: YPbPr through BNC connectors with HV BNC connectors. Supports 480i/576i,
480p/576p, 720p, 1080i, and SCART RGB.
HDMI1: Receive from HDMI source and then switch to HDMI-out (To AV receiver) connector.
HDMI2: Receive from HDMI source and then switch to HDMI-out (To AV receiver) connector.
HDMI3: Receive from HDMI source and then switch to HDMI-out (To AV receiver) connector.
HDMI-in (From AV receiver) : Supports
(1)Video: 720(1440)x480i@59.94/60Hz, 640x480p@59.94/60Hz,
720x480p@59.94/60Hz, 720(1440)x576i@50Hz, 720x576p@50Hz,
1280x720p@59.94/60Hz, 1920x1080i@59.94/60Hz
(2)Audio: Linear PCM audio.
VGA-in:
Output Connector:
HDMI-out (To AV receiver): Switch 3 HDMI source to one HDMI output; this output can be
connected to “AV receiver” device or HDMI-in (From AV receiver) connector.
HDMI-out to display device
Other connectors:
RS232: one connector for firmware upgrading, debugging and remote control.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
○
•
