Connecting the components
16
Connecting the components
Before you begin
Connecting the components of the phone
1. Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the back of the telephone. Connect the other
end to the jack on the handset.
2. Connect one end of the CAT-5 line cable to the LAN Ethernet port
located on the back of the telephone (identified with a LAN icon).
Plug the other end of the CAT-5 line cable into the IP network.
3. Contact your installation technician for the proper power option.
This telephone can be powered by an AC adapter or over a LAN.
4. Thread the cord around the strain relief, retaining hook, and channel
provided for a secure power connection.
5. Secure the telephone footstand to the telephone base.
CAUTION
Damage to equipment
Do not plug the IP Phone 2001 into a
regular telephone jack. This results in
severe damage to the IP Phone. Consult
your system administrator to ensure that
you plug your telephone into a 10/
100BaseT Ethernet jack.
