Selecting the audio recording channels and monitor output
Audio recording channels
The audio channels can be selected as shown below
using the AUDIO setup menu items.
Recording
track
CH1
Signals recorded
CH1 input, CH2 input, CH3 input, CH4 input,
CH1+CH2 input, CH3+CH4 input
CH2
CH1 input, CH2 input, CH3 input, CH4 input,
CH1+CH2 input, CH3+CH4 input
CH3
CH1 input, CH2 input, CH3 input, CH4 input,
CH1+CH2 input, CH3+CH4 input
CH4
CH1 input, CH2 input, CH3 input, CH4 input,
CH1+CH2 input, CH3+CH4 input
CH5
CH5 input, CH6 input, CH7 input, CH8 input,
CH5+CH6 input, CH7+CH8 input
CH6
CH5 input, CH6 input, CH7 input, CH8 input,
CH5+CH6 input, CH7+CH8 input
CH7
CH5 input, CH6 input, CH7 input, CH8 input,
CH5+CH6 input, CH7+CH8 input
CH8
CH5 input, CH6 input, CH7 input, CH8 input,
CH5+CH6 input, CH7+CH8 input
CUE
CUE input, CH1 input, CH2 input, CH3 input, CH4
input, CH5 input, CH6 input, CH7 input, CH8
input, CH1+CH2 input, CH3+CH4 input,
CH5+CH6 input, CH7+CH8 input, CH1–CH8 input
Monitor output channels
When
(M MIX) on the <AUDIO SHIFT2> menu is
set to L, R or L/R, the signals of a multiple number of
channels can be mixed and output.
When the number key corresponding to the channel
whose signals are to be monitored is pressed while
the “L” (or “R”) button is held down, that channel is
selected, and its signals are displayed on the audio
level meter. (The same steps can also be taken to
de-select a channel which has already been selected.)
However, only up to 2 channels among the CH1-CH4
channels and only up to 2 channels among the CH5-
CH8 channels are selected.
(Examples: CH1 + CH3 + CH5 + CH8 can be selected
but CH1 + CH2 + CH4 cannot be selected.)
F6
Number keys
MONITOR SELECT switches
