9
1. Installation and Quick Start
1.6 Recording paper
A Open the top cover by pressing the top cover
release button (1).
B Install the recording paper.
C Insert the leading edge of the paper into the
opening above the thermal head (1).
D Pull the paper out of the unit.
L Make sure that there is no slack in the
paper roll.
E Close the top cover securely by pushing
down on both sides.
F Press {FAX/START} to cut the paper.
Correct
Incorrect
1
1
Note:
L If the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.
L When the power cord is connected, a
message is printed each time the top
cover is opened then closed. If the
recording paper is installed upside down,
the message will not be printed. Install the
paper correctly.
L For accessory information, see page 5.
{FAX/START}
FC962HK-PFQX2283ZA-en.book Page 9 Thursday, September 15, 2005 4:20 PM
