9. Help
71
2 Remove the paper tray cover (1).
3 Remove the recording paper (1), then
remove the drum and toner unit (2) to allow
the jammed paper (3) to pull free from the
rear cabinet.
4 Lift both green levers (1) forward until they
stop.
5 Remove the jammed paper (1) from the
fuser unit by pulling it upwards carefully, then
install the drum and toner unit.
6 Push back the levers (1) to the original
position.
7 Close the front cover (1) by pushing down
on both sides, until locked.
8 Pull the tension plate forward (1), then re-
insert the recording paper (2).
1
1
2
3
1
1
1
1
FLM653HK-PFQX2345ZA-en.book Page 71 Tuesday, November 22, 2005 4:39 PM
