1. Introduction and Installation
10
L To select features or feature settings
during programming (page 42).
L To navigate to the next operation.
U {MENU}
L To initiate or exit programming.
V {COPY}
L To initiate copying (page 33).
W {STOP}
L To stop an operation or programming.
X {FAX/START}{SET}
L To initiate fax transmission or reception.
L To store a setting during programming.
Installation
1.5 Ink film
1.5.1 Installing the ink film
1 Open the front cover (1) by pulling up the
centre part (2).
2 Release the back cover by pushing the green
button (1) on the right side of the unit.
OR
Release the back cover by pushing the green
lever (2) in the unit.
3 Open the back cover (1).
4 Insert the gear with blue core of the front ink
film roll (1) into the left slot of the unit (2).
Insert the rear ink film roll (3).
L The ink film is safe to touch, and will not
rub off on your hands like carbon paper.
1
2
1
2
1
2
1
3
FP343-363HK.book Page 10 Thursday, July 31, 2003 2:45 PM
