10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook
Making a voice call using the
phonebook
1Press (Phonebook).
2Press (Search button) repeatedly until the
desired name is displayed.
3Enter the name, up to 12 characters (see the table on
page 9 for instructions).
4Press (Register).
3Lift the handset or press (Speakerphone).
5Enter the telephone number, up to 30 digits.
●
To correct a mistake, press (Clear).
7If necessary, enter the group number (1–9).
8Press (Register).
●
To program other items, repeat steps 3 to 8.
9Press (Stop) to exit the program.
Editing a stored name or number
2Press (Search button) repeatedly until the
desired name is displayed.
3Press (Register).
4Edit the name (see the table on page 9 for
instructions), then press (Register).
●
If you do not need to edit the name, press
(Register) and skip to step 5.
5Edit the telephone number, then press
(Register).
●
If you do not need to edit the telephone number,
press (Register) and skip to step 6.
6If necessary, enter the correct group number.
7Press (Register).
2Press (Register).
●
“XXX” shows the number of
remaining stations you can
store.
●
You can program up to
150 stations, including 4
pre-programmed stations.
1Press (Phonebook).
1Press (Phonebook).
