Parts and their functions
Front panel
Counter display
1 POWER switch
2 Cassette slot
Align the center of the cassette with the center of
the slot and push it gently inside.
The cassette tape is loaded automatically.
3 EJECT button
When this is pressed, the tape is unloaded, and
several seconds later the cassette will be
automatically ejected.
When it is pressed while the counter display shows
the CTL display, the display will be reset.
4 REC/REC INH lamp
REC: The lamp lights during recording
2
.
REC INH:
The lamp lights when the cassette is set to the
accidental erasure prevention status.
It also lights when the REC INHIBIT switch Q is
set to the ON position. Recording operations
cannot be performed while it is lighted.
5 REMOTE lamp
This lights when the LOCAL/MENU/REMOTE
switch > is set to the REMOTE position.
2 This function is operational only when the AJ-YA120AG (optional accessory) has been installed.
