19
Previous
screen
1 Place the unit upside down.
1 Place the unit upside down.
Attaching and Removing the Swivel Stand
•Attachment
•Removal
2 1) First, insert the swivel base
into the front openings of the
projector.
2) Then, while pressing the
PUSH Button, insert into the
rear openings.
2 While pressing the PUSH
Button, remove the Swivel
stand.
Caution:
Never pick the unit up by the swivel stand.
A swivel stand can be attached to or removed from the LCD
Projector. When attached, you can fine-adjust the projection angle.
To attach or remove the swivel stand, follow the steps below.
Place the unit on a flat,
stable surface covered with
a soft cloth, etc.
Place the unit on a flat,
stable surface covered with
a soft cloth, etc.
PUSH Button
PUSH
Button
