Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the recharger so that it is dry before charging it.
You can charge without the recharger.
Charge
Attach the detergent
cartridge and the
water tank to the
self-cleaning
recharger.
Page 7
Insert the appliance
plug.
Plug in the adaptor.
Remove the
protective cap and
then attach the
shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when
you are attaching the shaver.
• The backlight of the LCD
panel glows and charging
starts.
• Charging is completed when
the backlight of the LCD panel
blinks.
(Max. 1 hour later)
• You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
• A special plug adaptor may be required in some areas.
Charging without the self-cleaning recharger
1. Insert the appliance plug into
the shaver.
2. Plug in the adaptor into a
household outlet.
ES8228_USA.indb 5 2006/08/21 15:51:38
