[PICTURE] menu
ENGLISH
- 43
Settings
Press the ▲▼ buttons to select [Y ADJUST] 2)
and then press the <ENTER> button.
The [Y ADJUST] menu is displayed and a
z
maximum of 9 points are adjustable.
Y ADJUST
POINT5
0% 50% 100%
INPUT
OUTPUT
INPUT OUTPUT50%0
(A)
Displays information about the current selected point
(A).
Default setting:
POINT [5] INPUT [50 %] OUTPUT [0]
[POINT]
[1] to [9]
Display the present selected point
number.
Numbers 1 to 9 are displayed from
the left of the input signal level.
Your selected point is indicated in
yellow on the graph.
[INPUT]
[1 %] to
[99 %]
Display the input level of the present
selected point.
Setting range: from 1 to 99 % in
increments of 1 %.
Default settings: 10, 20, 30, 40, 50,
60, 70, 80, 90 %
[OUTPUT]
[-252] to
[+252]
Display the output level of the present
selected point.
Adjustable range depends on the
input level.
Default setting: 0
Adjust the tone with the ▲▼3)
▲
▼
buttons,
<ENTER> button, <SUB MENU> button, or
<DEFAULT> button.
a. Changing the selected point
Using the remote control
z
The selection point moves one point to the right each
time the <SUB MENU> button is pressed. The default
setting is point 5.
Ex. 5 -> 6 ->...-> 9 -> 1 ->...
Y ADJUST
POINT
0% 50% 100%
INPUT
OUTPUT
INPUT OUTPUT50%+105
Y ADJUST
POINT
0% 50% 100%
INPUT
OUTPUT
INPUT OUTPUT60%06
Using the device control
z
You can also change the [POINT] from the [GAMMA
ADJUSTMENT] menu directly.
Use ▲ ▼ to select [POINT] and ◄ ► to change the
point.
GAMMA ADJUSTMENT
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
GADJUST
ADVANCED
5
PICTURE
POSITION
LANGUAGE
OPTION
GAMMA ADJUSTMENT
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
GADJUST
ADVANCED
6
PICTURE
POSITION
LANGUAGE
OPTION
