Read this rst!
ENGLISH -
7
Important
Information
To remove the battery
Remote Control Battery
1. Press the guide and pull out
the battery base.
2. Remove the battery.
Trademarks
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of
•
HDMI Licensing LLC in the United States and other countries.
PJLink
•
™
is a trademark or pending trademark in Japan, the United States, and other countries and regions.
RoomView, Crestron RoomView are registered trademarks of Crestron Electronics, Inc, and Crestron
•
Connected is the trademark of Crestron Electronics, Inc.
Other names, company names or product names used in these operating instructions are the trademarks or
•
registered trademarks of their respective holders.
Please note that the operating instructions do not include the
®
and
TM
symbols.
Illustrations in these operating instructions
Note that illustrations of the projector and screens may differ from the ones you actually see.
•
Page references
In these instructions, references to pages are indicated as: (
•
Æ
page 00).
Term
In these instructions, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
•
