Maintenance/replacement
60
- ENGLISH
Maintenance
Clean the air lters.4 )
Vacuum dirt and dust from the air lters.
z
Install the air lters. 5 )
To install the air lters, reverse the previous steps until you hear a "click" sound.
z
Reset the [Filter Reminder].6 )
Turn on the power and perform [Cleaning up Reminder] in the [Options] menu.
z
(
Æ
page 48)
Attention
Turn off the power before you clean the air lters.
z
Be sure to attach the air lters properly. If you use the projector without attaching the air lters, the projector may be
z
damaged due to the dirt or dust.
Note
If the air lter has been damaged or dust / dirt can not be removed, please replace it with a new lter.
z
The <TEMP> indicator lights up and the warning temperature message displays because of clogging within 500 hours,
z
depending on the using environment. In that case, clean the air lter at short intervals.
If the spacer (detachable) of the adjustable feet is overlapping at removing the air lter (rear), rotate the spacer with
z
grabbing the knob of the spacer to keep a clearance from the air lter (rear).
Air lter (rear)Space (detachable)
Air lter (side)
Bottom View
Adjust feet (Rear)
