27
ENGLISH
Returning to the previous
page
• Pressing the MENU button returns the screen to
the previous menu page.
• When the MAIN MENU is on the screen, pressing
the MENU button clears all menus from the
screen.
Menu items shown in
black characters
• Some menu items may not be valid for certain
signal formats applied to the projector.
The menu items that cannot be adjusted or used
are shown in black characters, and they cannot be
selected.
Menu items setting
• The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt “ CHANGE” appears when
changing the setting.
• A prompt “ ADJUST ” appears for a
separate bar graph.
Resetting to the factory
default
DEFAULT button is used to reset all of the projector
adjustment values to the default levels which were
set at the time of shipment from the factory.
Basic menu operations
Press the MENU button.
The MAIN MENU appears on the screen.
Select (highlight) the desired item with
the or button.
Selected items are displayed in yellow.
Press the ENTER button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : POSITION Menu)
Highlight the desired adjustment item
with the or buttons, then change
the parameter value with the or
buttons.
(Example of separate adjustment screen)
• If no button is operated for approx. 5 seconds
while a bar graph is displayed, the screen will
return to the previous page.
