A SERVICE OF

logo

Special Features
ENGLISH77
Direction
The fan is controlled in accordance with the setup
angle.
1. Press▲▼toselect
“DIRECTION”.
2. Press◄►toswitch
“DIRECTION”.
The setting will change as follows each time
◄►ispressed.
H V
H (HORIZONTAL):
This is the standard setup.
V (VERTICAL):
Select this if the projector is tilted at a large
vertical angle (an angle which exceeds 30° from
the horizontal).
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
Output resolution
(PT-D10000E only)
Pictures projected onto a screen (for SXGA) with
a 5:4 aspect ratio can be displayed with the SXGA
resolution.
1. Press▲▼toselect“OUTPUT
RESOLUTION”.
2. Press◄►toswitch“OUTPUT
RESOLUTION”.
The setting will change as follows each time
◄►ispressed.
SXGA+ SXGA
SXGA+ (1 400 × 1 050):
For projecting pictures onto a screen with an
aspect ratio of 4:3.
SXGA (1 280 × 1 024):
For projecting pictures onto a screen with an
aspect ratio of 5:4.
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
OUTPUT RESOLUTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
MENU SELECT
CHANGE
1/2
2
FRONT-F
LOW
H
SXGA+
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
OUTPUT RESOLUTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
MENU SELECT
CHANGE
1/2
2
FRONT-F
LOW
H
SXGA+
QUAD
OFF
LOGO1