A SERVICE OF

logo

S PEC F ILE
PT-FW300
LCD Projector
As of November 2008 < 6 >
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
0.51V 0.51V
0.24H0.24H
H
(Width of
projected image)
V
(Height of
projected image)
Standard position
of projected image
Installable angle
Install the projector at an angle within the range shown below..
-30°
+30°
• Vertical direction
The projector may be installed at a vertical angle
of ±30°.
• Horizontal direction
The projector may not be angled horizontally.
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 16 : 10
minimum L (m) = (diagonal screen size in inches) x 0.0289 - 0.046
maximum L (m) = (diagonal screen size in inches) x 0.0576 - 0.061
Aspect ratio 16 : 9
minimum L (m) = (diagonal screen size in inches) x 0.0297 - 0.045
maximum L (m) = (diagonal screen size in inches) x 0.0592 - 0.061
NOTE:
Distances calculated with the above equations will include a slight error.