11
Getting started
VQT3Z79
STEP 2: Preparing the speakers
[BTT790] Front speakers, Surround speakers [BTT490] Front speakers
1 Attach the stand to the base. 2 Tighten the 3 screws (supplied) securely.
3 Attach the speaker. 4 Tighten the screw (supplied) securely.
[BTT583] Front speakers
1 Thread the speaker cable.
≥ Use suitable speaker cables for each speaker type. (> 12)
2 Pull the cable and slide into the groove.
≥
When attaching the speakers to a wall (
>
42)
Remove the base.
≥
When reattaching the base to the speaker
Put the base on the speaker, and then do the
base removal operation in reverse order.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Assembling the front and surround speakers
Thread the speaker
cable through the
base.
Slide the speaker cable into the
groove.
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 11 ページ ２０１２年１月１９日 木曜日 午前１０時３４分
