12
VQT4T91
Specifications
∫ GENERAL
∫ AMPLIFIER SECTION
∫ SPEAKER SECTION
∫ BLUETOOTH SECTION
* Prospective communication distance
Measurement environment:
Temperature 25 oC (77
o
F) / Height 1 m (3.3 ft)
Measure in “MODE 1”
∫ TERMINALS SECTION
≥ Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥ Total harmonic distortion is measured by a digital spectrum
analyzer.
Unit care
Pull out the AC power plug from the outlet before
maintenance.
∫ Clean this unit with a soft, dry cloth
≥ When dirt is heavy, wring a cloth moistened in
water tightly to wipe the dirt, and then wipe it with
a dry cloth.
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory presets to delete the user
settings. (l 9, “To return all settings to the factory
preset”)
≥ The operation history may be recorded in the
memory of this unit.
License
Power consumption 11 W
Power consumption in standby mode
Approx. 0.1 W
Power supply AC 120 V, 60 Hz
Dimensions (WkHkD)
570 mm
k
206 mm
k
100 mm
(22
7
/
16
qk
8
1
/
8
qk
3
15
/
16
q
)
Mass (Weight) Approx. 2.7 kg (5.95 lbs)
Operating temperature range
0 oCtor40 oC(r32
o
F to r104
o
F)
Operating humidity range
35 % to 80 % RH (no condensation)
RMS Output Power Stereo mode
Front Ch (both ch driven)
20 W per channel (6 ≠),
1kHz,10%THD
Total RMS Stereo mode power 40 W
FTC Output Power Stereo mode
Front Ch (both ch driven)
15 W per channel (6 ≠),
20 Hz to 20 kHz, 1 % THD
Total FTC Stereo mode power 30 W
Type 2 way, 2 speaker system (Bass reflex)
Speaker unit(s)
1. Woofer 8cm(3
1
/8q)k1 per channel
2. Tweeter 2.5 cm (1q)k1 per channel
Impedance 6 ≠
Output sound pressure
83.5 dB/W (1 m (3.3 ft))
Frequency range 52 Hz to 25 kHz (s16 dB),
75 Hz to 22 kHz (s10 dB)
Version Bluetooth
®
Ver.2.1 +EDR
Output Class 2 (2.5 mW)
Communication distance About 10 m (33 ft)*
Communication method 2.4 GHz band FH-SS
Correspondence profile A2DP
AUX Terminal Stereo, ‰3.5 mm (
1
/8q) jack
The Bluetooth
®
word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license. Other trademarks
and trade names are those of their respective owners.
SC-NE1_PPC~VQT4T91.book 12 ページ ２０１２年１２月１９日 水曜日 午後４時４３分
