7
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
(
50-inch model
) / (
60-inch model
) from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
from the cover.
50-inch model
4 Pull out the cover.
50-inch model
5 Remove the assembly screws from the bracket.
6 Remove the assembly screws from the back of the base and pull out the neck.
Connections
●
External equipment and cables shown are not supplied with this TV.
●
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●
Check the type of terminals and cable plugs are correct when connecting.
●
Always use a fully wired HDMI cable.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
Also read the manual of the equipment being connected.
Terminals
6 7
2
4
3
1
5
1
SD Card slot
2
USB 1 - 2 port
3
HDMI1 - 3 (p. 8, 9)
4
DIGITAL AUDIO OUT
5
AV (COMPONENT / VIDEO)
(p. 9)
6
Aerial terminal (p. 8)
7
ETHERNET (p. 8)
