Setting Up the TV
10 English
• 40” class
2
1
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Lay the TV on a foam mat or thick soft cloth on a table
(32” class only).
2 Remove the assembly screws from the TV.
3 Pull out the pedestal from the TV.
4 Remove the assembly screws from the bracket.
Wall mounting the TV (optional)
Please contact a professional installer to purchase
the recommended UL qualified wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
b
Rear of the TV
Screw for fixing the
TV onto the wall-
hanging bracket
(not supplied)
Depth of
screw
(View from the side)
a
■ Holes for wall-hanging bracket installation
Class a b
32”
7.9” (200 mm) 7.9” (200 mm)
39”
40” 7.9” (200 mm) 3.9” (100 mm)
■ Screw specification
Class Type
Depth of screw
Minimum Maximum
32” M4 0.36” (9 mm) 0.55” (14 mm)
39” M6 0.44” (11 mm) 1.06” (27 mm)
40” M6 0.44” (11 mm) 0.59” (15 mm)
Warning
●
Always be sure to ask a qualified technician to carry
ou
t set-up.
●
Do not mount the unit directly below ceiling lights
(s
uch as spotlights, floodlights or halogen lights) that
typically give off high heat. Doing so may warp or
damage plastic cabinet parts.
●
Take care when fixing wall brackets to the wall.
Al
ways ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its
fi
xed wall position when it is no longer in use.
●
Incorrect wall-hanging bracket or incorrect fitting
ma
y cause equipment to fall, resulting in injury and
product damage.
●
Panasonic disclaims liability for any damage or injury
ar
ising from incorrect wall-hanging bracket, incorrect
fitting or otherwise failure to follow the above
instructions.
Co
2
1
1
2
A
3 A
4
5
An
t
Pow
(su
Inse
plac
Impo
●
Di
s
firs
●
Th
e
onl
TC-40A420_32_39A400U_EN.indd 10TC-40A420_32_39A400U_EN.indd 10 28-Apr-14 4:28:09 PM28-Apr-14 4:28:09 PM
