46
Communication Camera
■Part names and functions
Camera Lens
Stand Unit
Stand
Front Panel
Stand
Rear Panel
Microphones
USB Cable
Approx. 9’10” (Approx. 3 m)
Camera front view Camera side view
Stand
Tally Lamp
Lights red while shooting.
Microphones
■Handling Precautions
●
Do not touch the camera lens section with your hand.
Doing so may cause the lens to become dirty, which may cause the image to become blurred.
●
Do not unplug the USB cable during use.
Doing so may cause malfunction of the camera or the television.
In such a case, turn the main power off with the power button on the television body and then turn it on again after
connecting the USB cable of the camera.
●
Do not pull the USB cable excessively.
●
Do not drop, strike, or shake the camera.
●
Do not store or use this camera in high temperature areas or near strong magnetic fields.
●
Do not use this camera in dusty, steamy, or smokey locations, or where it may be splashed with water or liquids.
●
Do not bend the stand section.
■Installing the camera onto the television
Connect the USB cable of the camera to the USB port on the television.
1. Press the power button on the television to switch the television power off.
2. Clip the camera stand onto the top of the display panel and fix it securely in place.
3. Insert the USB cable of the camera into the USB port on the television.
4. Press the power button on the television to switch the television power on.
USB cable
Note
●
Always use the button on the television to switch the power ON and OFF.
●
If the camera is placed near to the television speakers, a high-pitched noise known as “howling” may occur depending
on the volume of the television. If howling occurs, lower the volume of the television speakers.
●
Do not use a USB hub to connect to the television. Always connect the camera USB connector directly to the television.
●
This camera cannot be used with a PC or televisions made by another company.
Use only the Communication camera recommended for this television.
■Using the Camera
●
The television needs to be connected to the Internet using a broadband connection.
1. Display the “VIERA Connect” on the television screen. (p. 45)
2. Select a content (e.g., “Skype” etc.) to use the camera, and press OK.
