Technical
41
Technical Information
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by
pressing the Stereo / Bilingual Sound Selection button.
Audio Signal STEREO
MAIN
SUB
MONO
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of
broadcast
Regular broadcast
(Standard Audio)
Regular + NICAM MONO
(MAIN )
NICAM
STEREO
NICAM DUAL
MONO
(MAIN / SUB )
Mode Indicator
No
Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of
broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL
MONO: MAIN
/ SUB
STEREO
Mode Indicator
No
Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO
automatic switching occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the stereo / bilingual sound selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
TH-L42U20,28,29KMRTX_EN.indd 41TH-L42U20,28,29KMRTX_EN.indd 41 3/23/2010 3:30:50 PM3/23/2010 3:30:50 PM
