48
Technical Information
When you receive the stereo / bilingual sound system, sound output modes can be selected
by pressing the Stereo / Bilingual Sound Selection button.
Audio Signal STEREO
MAIN
I
SUB
II
MONO
Mode Indicator
I II
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Regular broadcast
(Standard Audio)
Regular + NICAM MONO
I
(MAIN
I
)
NICAM STEREO
NICAM DUAL MONO
(MAIN
I
/ SUB
II
)
Mode Indicator
No Indicator
I
I
II
A2 (German) .......Used in Australia, Malaysia etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN
I
/ SUB
II
STEREO
Mode Indicator
No Indicator
I
II
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO
automatic switching occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some
countries.
CH Display / Receive Channel
CH 1 - CH 11 CH 21 - CH 70 CH 74 - CH 78 CH 80 - CH 120
Rating Meaning
No Block Not classified
G General
PGR Parental Guidance Recommended
AO Adults Only
Channel Allocation (Analogue TV mode)
Rating (Digital TV mode)
Stereo / Bilingual Sound Selection (Analogue TV mode)
