How to Use the Menu Functions
40
Setup
Item Adjustments / Configurations (alternatives)
PC Setup
Input Resolution
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Clock Sets to the minimum level if noise occurs.
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
Sync
• H & V
• SOG
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Reset PC Settings Press the OK button to reset the PC Setup settings to the default
DVI Position Settings
H-pos Adjusts horizontal position settings of DVI
V-pos Adjusts vertical position settings of DVI
Reset DVI
Position
Settings
Press the OK button to reset the DVI Position Settings to the default.
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Recording Setup
Formats the connected USB HDD / insert SD card and sets the condition
(p. 51 - 53)
Child Lock
Locks a channel / AV input to prevent access to it (p. 47)
Tuning Menu
Favourites Edit Creates a list of favourite channels (Digital TV mode) (p. 44)
Channel List Skips the unwanted channels or edits channels (p. 44, 46)
Auto Tuning Sets all Digital TV or Analogue TV channels automatically (p. 45, 46)
Manual Tuning Sets the TV channels manually (p. 45, 46)
Update Channel List
Updates the channel list while keeping your settings (Digital TV mode) (p. 45)
Signal Condition Checks the Digital TV signal condition (p. 45)
Add TV Signal
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Tuning]
for first using the TV.
•
To operate, refer to the [Auto Tuning] operations for first using the TV (p. 13).
