Viewing 3D images
28
Charging the 3D Eyewear (rechargeable type)
To charge when the TV is in the Standby mode
POWER
INPUT
TV AV
SD CARD
ASPECT
EXIT
INFO
OPTION
STTLTEXT
R G Y B
CH
POWER
REC
RETURN
jk l
ghi
mno
tuvpqrs
wxyz
abc def
MUTE
LAST VIEW
CHVOL
INDEX HOLD
TV
MENU
1. Display the menu
MENU
“How to Use the Menu Functions” (p. 34)
2. Select [Setup]
3. Select [Other Settings]
2/2
System Menu
Other Settings
Access
access
select
4. Select [USB Charge in Standby] and set [On]
USB Charge in Standby
Off
Power Save
Other Settings
On
access
select
[USB Charge
in Standby]
store
select
[On]
5. Turn off the television power, and set
the 3D Eyewear power switch to “OFF”
6. Connect as shown
USB connector
Mini USB connector
•
The indicator lamp
lights red, and
charging starts.
•
When the
indicator lamp
turns off, charging
is complete.
(Approximately 2
hours required)
7. Remove the charging cable
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”
2. Connect as shown above, and turn on the television power
•
The indicator lamp of the 3D Eyewear lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable
Storage and Cleaning
•
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake
off any dust from the cloth before use.
•
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
•
Do not dunk the 3D Eyewear in liquid such as water when cleaning.
•
Avoid storing the 3D Eyewear in hot or highly humid locations.
•
During the long period of disuse, full charge the 3D Eyewear once every 6 months to keep the battery
performance.
Note
•
As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.
