13
Installation of the USB Driver
Setup is completed when all the files of the driver are copied.
7
Click to close this wizard.
1
Click on
[Start]
[Settings]
[Control Panel]
Double-click on “the system” icon of the control panel,
and open the properties of the system.
The properties of the system are opened.
2
Then click on the “Device Manager” tab.
3
Double-click “Ports [COM&LPT]”. Confirm that “USB-
Serial for Touch Panel (COMx)” is found in “Ports
[COM&LPT]”.
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
4
Next, double-click “Universal Serial Bus controllers”.
5
Confirm that “MATSUSHITA USB-Serial Bridge for Touch
Panel” is found in “Universal Serial Bus controllers”.
6
Click on this button.
The setup of the USB driver is finished.
COM port number is confirmed with “Device Manager”
