Technical Information
Programme Allocation (Analogue mode)
Rating (DVB mode)
Rating Meaning Rating Meaning
- Not classifi ed M Mature
P Pre school MA 15+ Mature Adult 15+
C Children AV 15+ Adult strong Violence 15+
G General R Restricted 18+
PG Parental Guidance recommended
Stereo / Bilingual Sound Selection (Analogue mode)
Note
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
When you receive the stereo / bilingual sound system, sound output modes can be selected by “MPX” in the
Sound Menu (p. 20).
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
A2(German) .......Used in Australia, Malaysia etc.
Note
•
During downloading, do not turn Off the TV or touch any buttons.
(The TV is automatically activated after downloading is completed.)
•
When the TV is switched to standby, there will be a clicking sound after a short delay. Similar clicking sounds will also
occur at 3:00 AM and 5:00 AM when “Auto update Search in Standby” (p. 23) is set to “On”. These sounds are normal.
Update system software to ensure that you have latest version software.
If there is an update available, a notifi cation banner is displayed when the service has the update information.
•
To download new software, press “OK” Downloading (approx. 20 mins.)
If you choose not to download, press “EXIT”.
Ŷ
To update automatically
Set “Auto Update Search in Standby” to “On” (p. 23)
If there is a new version software being broadcast, the TV will download this automatically.
•
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every morning under the following
condition.
Standby (TV turned Off with the remote control)
Ŷ
To update manually
Perform “System Update Search Now” (p. 23)
If there is an update available, a notifi cation banner is displayed.
•
To download new software, press “OK” Downloading (approx. 20 mins.)
If you choose not to download, press “EXIT”.
Updating the software system (DVB mode)
Data format for Card browsing
Note
•
A JPEG image modifi ed with a PC may not be displayed.
•
Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
•
Partly degraded fi les might be displayed at a reduced resolution.
•
Only “.JPG” extension can be read by this TV.
•
The folder and fi le names may be different depending on the digital camera used.
•
Do not use two-byte characters or other special codes.
•
The card may become unusable with this TV if the fi le or folder names are changed.
Photo : Still images recorded with digital still cameras compatible with JPEG files of DCF
and
EXIF standards
Data format : Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Max. number of files : 9,999
Image resolution : 160 × 120 to 10,000,000
Transfer rate : 1.6 MB/Sec
•
Compliant card type (maximum capacity): SDHC Card (16 GB), SD Card (2 GB), Multi Media Card (128 MB),
miniSD Card (1 GB) (requiring miniSD adapter)
•
If miniSD Card is used, insert / remove it together with the adapter.
•
Check the latest information on the card type at the following website. (English only)
http://panasonic.co.jp/pavc/global/cs/
DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
