Customizing Your Machine
33
Programming
Your Machine
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST
(HOME)
1 Normal Setting the home position for the CONTRAST.
2 Lighter
3 Darker
02 RESOLUTION
(HOME)
1 Standard Setting the home position for the RESOLUTION.
2Fine
3 S-Fine
4 Halftone
04 STAMP
(HOME)
1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2On
05 MEMORY
(HOME)
1 Off Selecting the memory transmission mode.
2On
06 DIALLING METHOD 1 Pulse Selecting the dialling method.
2 Tone
07 HEADER PRINT 1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
08 HEADER FORMAT 1 Logo, ID No. Selecting the header format.
2 From To
09 RCV'D TIME PRT 1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received document.
2 Valid
10 KEY/BUZZER VOL. 1 Off Selecting the volume of the Key/Buzzer tone.
2Soft
3 Loud
12 COMM. JOURNAL
(HOME)
1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/Inc. only.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
2 Always
3 Inc. only
13 AUTO JRNL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
2 Valid
17 RECEIVE MODE 1 TEL Setting the receive mode.
2FAX
3 FAX/TEL
SW.
4 TAM I/F
18 OP CALL TIMER 1 20 sec. Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
Mode. (See page 59)
2 30 sec.
3 40 sec.
4 50 sec.
Continued on the next page...
