C2631M-C (7/09) 241
6. Click Clr button again to exit programming mode.
Figure 216. Clearing a Pattern Using Web Client
Accessing Programming Features of Remote Cameras
You can use the PTZ function to program features of remote cameras, such as Pelco’s Spectra III. Only cameras that support remote programming
through Pelco D, P, or Coaxitron protocols can use this feature.
To access a programming menu for a remote camera:
1. Drag a camera from the Site Tree onto a view panel.
2. Click the Pgm button to access remote camera setup mode.
For certain camera models, you can also select preset number 95 from the keypad to access remote setup mode. To access preset
number 95, click the Set button , click button 9, 5, and then click the Preset button from the PTZ keypad.
Figure 217. PTZ Control Panel Using Web Client
ᕢ
ᕡ
