223
Appendix
11
*6 Light is unevenly distributed.
*7 When using the lens shutter built-in to the adapter
*8 Set the aperture manually.
*9 Light may be unevenly distributed.
A K-mount lens can be attached to this camera with the use of the optional
Adapter Q for K Mount Lens. When a K-mount lens is used, the focal
length must be set manually for functions such as Shake Reduction, since
the focal length cannot be obtained automatically.
1
Make sure that [Shake Reduction] is set to Q (On), and
turn the camera off.
Refer to “Taking Pictures Using the Shake Reduction Function” (p.93) for
details.
2
Attach the mount adapter and lens, and turn the camera on.
The [Input Focal Length] screen appears.
3
Use the four-way controller
(2345) to set the focal length.
Select the focal length for the lens to be
attached. When using a zoom lens, select
the actual focal length at the zoom setting
being used.
You can also use the e-dial to select a
value from those displayed on the left side of the monitor.
4
Press the 4 button.
The camera is ready to take a picture.
Using a K-Mount Lens
• To change the focal length setting, use [Input Focal Length] in the [A Rec.
Mode 3] menu.
• When the Adapter Q for K Mount Lens is used, set the aperture manually
regardless of the capture mode setting. Images are taken in c (Aperture
Priority Automatic Exposure) mode, even when the capture mode is set to
n (Auto Picture), H (Scene), u (Blur Control), e (Program Automatic
Exposure), or b (Shutter Priority Automatic Exposure).
• Refer to the Adapter Q for K mount lens manual for details.
Cancel
Input Focal Length
300.0
200.0
135.0
77.0
55.0
35.0
21.0
15.0
MENU
0000.0
mm
OK
OK
