14
1 Double-click the [Unplug or
eject hardware] icon in the task
bar recognized area.
The [Unplug or Eject Hardware]
screen will appear.
2 Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop a Hardware device] screen
will appear.
3 Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message will appear.
4 Click [OK].
5 Turn off the camera and disconnect the USB cable from
your camera and PC.
Disconnecting the Camera from your PC
Windows 2000 / Me
• If the camera (removable disc) is being used by an application
such as ACDSee for PENTAX, the camera cannot be
disconnected until the application is closed.
• In the event that an error message is displayed in Step 4, confirm
that the viewfinder lamp is not blinking and then disconnect the
camera.
e_00_pc_kb376.book Page 14 Thursday, April 8, 2004 1:25 PM
