DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
would like to stop a programmed recording session,
press the button STANDBY m for more than 3
seconds.
DDuring recording, the red recording light at the front
of the machine (RECORD5) will be alight.
DIf the end of the cassette is reached during a
recording, the TV-Video Combi will automatically
eject the cassette.
DIf you forgot to insert a cassette, ’NO CASSETTE’
will appear.
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected automatically.
DIf ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press the TIMER k button, you
have used up all the available TIMER blocks. If you
want to clear or check a programmed recording
(TIMER block), select it with ;P q or =P r .
DIf the message ’DATA ERROR’ appears on the
screen momentarily, the data for the recording was
not transferred. Please check date, start time and
end time of the programmed recording
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT scart socket).
How to check or change a programmed
recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the =P r or ;P q buttons to select the
programmed recording (TIMER) you wish to check or
change.
c Press the TIMER k button.
d Select the entry field with the QSr or SqP
button.
e Change any displayed information with the =P r or
;P q button or with the 0..9 buttons.
f Confirm with the OK button.
g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
DThe programmed recording will only function
properly, if the TV-Video Combi has been switched
off using the button STANDBY m .
DIf the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button OK ,to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
The selected programmed recording (TIMER) has now
been deleted.
d To end, press the MENU button.
21
