15
GUIDE Plus+
®
Table
Please enter here the data of the TV channels in the GUIDE Plus+
®
System. This can be helpful if you have to install the GUIDE Plus+
®
System again or other situations.
Using a pencil helps you to make changes afterwards.
Please observe:
•
All data of the GUIDE Plus+
®
System has been loaded. (after 24
hours).
•
All TV channels have been allocated to the right programme
numbers Read in the instruction manual the chapter 'Additional
installation features' the section 'allocating/deleting TV channels
manually'.
If TV channels were rearranged, stored or deleted, you have to switch off the
DVD-Recorder (button STANDBY m ) for approx. 4 minutes.
Only that way the new data can be transferred to the GUIDE Plus+
®
system.
•
If you have connected an external Receiver (Satellite receiver, cable
box, ...) write also the programme number of the TV channel from
the external receiver in this list.
•
You will find this table in the DVD-Recorder as follows:
- Switch the DVD-Recorder on
- Press GUIDE/TV on the remote control
- Select the menubar using A ,
- Press as often as necessary C until the field 'Editor' is marked.
Home
Editor displaysyourTVchannel settings.You may
switchchannelOn orOff(grey),selecttheir Source
andtheir programmenumber.Press Btouse. Press
DforInfo.PressCfor Setup.
Search Schedule Info Editor
Name On/Off Source Programme N.
BBC1 On TV P001
BBC2 On TV P002
ITV On TV P003
CH4 On TV P004
- Copy the displayed table in this list.
- You can go up/down one page using CHANNEL q ,
CHANNEL r .
The amount of channels is depending on your setup/devices.
Name On /Off Source Programme N.
ENGLISH
Quick install Guide
