Low ➟ Bright ➟ Low ➟ Bright (when battery-powered)
Helpful hints:
–
When battery-powered, the display illumination is default low to help save ener-
gy. Any other use of the
BRIGHTNESS CONTROL
for a brighter display adjustment
will therefore be effectively limited.
SETTING THE CLOCK
The time is displayed using the 24-hour clock.
1. Check the radio is switched off.
2. Press SET TIME to enter the clock setting mode.
3.
Hold down or press HOUR + or MINUTE + repeatedly to set and adjust the
hours and minutes respectively. Release HOUR + or MINUTE + when you
have reached the correct setting.
4. Press SET TIME
to confirm.
RADIO
1
Press
RADIO ON/OFF
once to switch on the radio.
™
Display shows the radio frequency of the last selected waveband briefly
before returning to the clock time. Your preset station is also shown if you
are listening to a preset. (See 4)
2 Press
BAND if you wish to change waveband.
3
Adjust the sound using VOLUME
.
4
Press
RADIO ON/OFF
to switch off.
Helpful hints:
–
In standby clock time, to view the current radio frequency,
• Press RADIO ON/OFF
once or more;
• For preset stations, press the respective PRESET button (1-5) once or repeatedly.
TUNING TO RADIO STATONS
Automatic tuning
• Press TUNING +/- one second or more to tune to your station.
™The radio automatically tunes to a station of sufficient reception.
