71
Flash Memory Data Erase Utility
z At the confirmation message, select [Yes] and press (Enter).
The computer will restart.
5 Press and hold
Fn
+
U
(F2) or
Fn
+ (Del) while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
z If the password is requested, enter the Supervisor Password.
6 Set the Product Recovery DVD-ROM into the CD/DVD drive.
7 Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
8 Press (Enter).
z The computer will restart.
z If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
9 Press 2 to execute [2. [Erase HDD]].
z To cancel this operation, press
0
.
10 At the confirmation message, press
Y
.
11 When [<<< Start menu >>>] is displayed, press (Enter).
The approximate time required for erasing data will be displayed.
12 Press
Space
.
At the confirmation message, press (Enter).
The hard disk erase process starts. When the operation is completed, the [Hard disk data has been deleted] mes-
sage will appear. If a problem has occurred during the operation, an error message will appear.
z To cancel partway, press
Ctrl
+
C
. The data erasure will be up to that point.
13 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter.
