1
Connect the COAXIAL Digital Audio Out jack of the
Player to the COAXIAL DIGITAL AUDIO IN jack on your
Stereo. Use a digital coaxial audio cable (not supplied).
2
Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the Player and to the TV’s
VIDEO IN jack. The supplied video cable has yellow ends.
3
Plug the power cords of the Player, Stereo, and the TV into
an active power outlet.
Press down POWER ON/OFF on the front of the Player to
turn on the Player.
4
Turn on the Stereo power and set your Stereo to the cor-
rect Audio In channel or sound source. Refer to the Stereo
owner’s manual for details.
5
Turn on the TV power. Set the TV to the correct Video In
channel. See your TV owner’s manual for details. Or, change chan-
nels at the TV until you see the blue Philips DVD background
screen or the Player’s screen saver on the TV.
• Set SPDIF OUT and LPCM 96K
accordingly.
Details are on page 38.
• Your Stereo must support
MPEG2 or Dolby Digital
TM
.
Check the Stereo’s manual.
• If you prefer or need to use the
S-VIDEO or Y Pb Pr jacks
instead, see pages 11-12.
Helpful Hints
