Configuring the Monitor Using Barcodes
Chapter 4 Configuring the Monitor 29
Configuring the Monitor Using Barcodes
The time format, date format, IUP scale and paper format can be set using barcodes. To
select a setting using a barcode, read the required barcode from the separate Feature Setting
Sheet provided with the Barcode Reader Kit.
To configure the Modem Interface Module using a Barcode Reader, refer to “Using the
Modem Setup Barcodes” on page 164.
Configuring the Monitor Using a PC
The service program (M1360-68875) allows you to carry out various extended
configuration and service functions on the monitor. Contact your Philips Sales Office for
details.
The Software Program is supplied in a kit which contains:
3.5 inch disk containing the software.
Cable adapter for connecting to a PC.
The program can be run on an industry-standard PC. To use the program with a Vectra,
you must replace the adapter on the end of the cable with the one provided, and copy the
software onto a disk.
Figure 4-1 Cable for an Industry Standard compatible PC
