DIf any of the TIMER blocks are in use, ’k’ will light up on
the video recorder display.
DIf you reach the end of the cassette during a recording,
the video recorder will automatically eject the cassette.
DIf you forget to load a cassette, ’NO CASSETTE’ will
appear on the TV screen and ’k’ will flash on the video
recorder display.
DIf you have put in a cassette which cannot be used for
recording, the video recorder will eject it.
DProgramme numbers ’E1’ and ’E2’ are not for recordings
from your TV.
DProgramme numbers ’AUX’ and ’MIC’ are for audio
recordings, not recordings from your TV.
Manual programming without VIDEO Plus+
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMERs button on the remote control.
c Select the line ’TIMER PROGRAMMING’ with the menu
buttons P = or P ; and confirm with the P button.
TIMER
TIMERPROGRAMMING
VPS
DATE PROG. START PDC END LP
01 01 20:00 21:30
________________________________
TOSTORE
PRESS OK
d Select the type of information you want to programme
with the menu buttons Q or P .
e Enter your information with the menu buttons P = or
P ; or with buttons 0-9 .
DUnder ’DATE’, use the SELECT button to select daily or
weekly programming.
’MO-FR’ record from Monday to Friday.
’MO’ record every week on the same day.
DUnder ’START’, use the SELECT button to switch VPS and
PDC on or off.
DUnder ’END’, use the SELECT button to select the
recording speed SP or LP.
f Confirm with the OK button.
DThe programming information has been stored in a TIMER
block.
g To end, press the TIMERs button.
h Make sure that the cassette you have put in can be
recorded on. Switch off the video recorder with the
mSTANDBY button.
DIf any of the TIMER blocks are in use, ’k’ will light up on
the video recorder display.
DIf you reach the end of the cassette during a recording,
the video recorder will automatically eject the cassette.
The TV set will then switch off after a few minutes.
DIf you forget to load a cassette, ’NO CASSETTE’ will
appear on the TV screen and ’k’ will flash on the video
recorder display.
DIf you have put in a cassette which cannot be used for
recording, the video recorder will eject it.
DProgramme numbers ’E1’ and ’E2’ are not for recordings
from your TV.
DProgramme numbers ’AUX’ and ’MIC’ are for audio
recordings, not recordings from your TV.
How to check or change a TIMER
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMERs button on the remote control.
c Select the line ’TIMER LIST’ with the menu buttons
P = or P ; and confirm with the P button.
d Select the TIMER you want to check or change with the
menu buttons P = or P ; .
e Press the menu button P .
f Select what you want to check or change with the menu
buttons Q or P .
g Change any information with the menu buttons P = or
P ; or with the buttons 0-9 .
h Confirm with the OK button.
i To end, press the TIMERs button.
j Make sure that the cassette you have put in can be
recorded on. Switch off the video recorder with the
mSTANDBY button.
13
