34
34
TURBO TIMER-RECORDING ENGLISH
5 The display shows the programme number to
which the video recorder is currently set, e.g.:
PROG. 01. Change if necessary the
displayed start time with
==PP--
or
;;PP++..
Confirm
with the
TTUURRBBOO TTIIMMEERR
button. The display
briefly shows OK.
1 Press the
TTUURRBBOO TTIIMMEERR
button on the
remote control.
TTuurrbboo TTiimmeerr--RReeccoorrddiinngg
2 The display shows the actual starting time, e.g.:
START 20:00. Change if necessary the
displayed start time with
==PP--
or
;;PP++..
FFOORR
EEXXPPEERRTTSS
AAccttiivvaattee VVPPSS//PPDDCC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use
SSEELLEECCTT
to switch
recognition of these signals on (VPS / PDC appears in
the display) or off.
3 Confirm with the
TTUURRBBOO TTIIMMEERR
button
4 The display shows a suggestion for the end of
the recording e.g.: END 22:00 (Start time
+ 2 hours). Change if necessary the
displayed start time with
==PP--
or
;;PP++..
Confirm
with the
TTUURRBBOO TTIIMMEERR
button
01
k
20:00
k
22:00
k
Using the Turbo Timer, you can make a programmed
recording within the next 24 hours quickly and simply,
without having to switch on the TV set. All you need to
do now is enter or confirm the desired programme
number and start and finish time in the video recorder.
